Service

Recoating & Deep Clean

Stag Timber Floors · Central Coast & Hunter Valley

What We Do

The Work.

There are two ways I use the Bona PowerScrubber at your place, and each one is a service in its own right. A Full Deep Clean is a restoration-grade wash for floors that are healthy but dulled by years of grime. A Recoat is the same deep clean plus a fresh Bona top coat over the existing finish. Both finish in hours, not days, and neither requires you to move out.

Full Deep Clean (no recoat) is for floors where the coating is still intact but the surface looks dull or dirty — cooking residue in the kitchen, foot-traffic film in hallways, polish buildup in living areas, sticky residue after renovation. The PowerScrubber runs two counter-rotating brushes that dispense Bona Deep Clean solution, scrub the boards, and vacuum the dirty water straight back up in one pass. It pulls out grime that mopping just smears around. No coats, no abrasion, no disruption — just the timber you forgot you had, usually back the same afternoon.

Recoat is everything the deep clean does, plus a fresh Bona top coat. Once the floor is surgically clean I mechanically abrade the existing finish so the new coat keys into it properly, then lay down a commercial-grade Bona top coat. You get the durability and sheen of a full re-sand without the dust, the vacating, or the thickness loss that comes from sanding timber away. Furniture goes straight back the same day.

Three tiers depending on what your floor needs: Revive (full deep clean only), Refresh (deep clean plus a Freshen Up top coat for light protection), or Recoat (deep clean plus a durable Bona top coat for long-term wear). I’ll tell you straight which one suits when I come out — and if your floor is past recoating and genuinely needs a full re-sand, I’ll say that too.

What's included

  • Full Deep Clean: Bona PowerScrubber with counter-rotating brushes + Bona Deep Clean solution
  • Full Deep Clean: same-day turnaround, no coats, no vacating, no moving out
  • Recoat: everything above, plus mechanical screen & buff to key the new coat
  • Recoat: commercial-grade Bona top coat for long-term durability
  • Works on coated timber, oiled timber, decks and hard-surface floors
  • Three tiers: Revive (clean only), Refresh (clean + Freshen Up), Recoat (clean + Bona top coat)
How It Works

The Process.

1. Assess

I check whether the existing coating is sound. If the finish has failed or the timber is scratched through, a full re-sand may be the better call — I'll tell you straight.

2. Deep Clean

The Bona PowerScrubber dispenses Bona Deep Clean solution, scrubs with counter-rotating brushes and extracts the dirty water in one pass. Built-up grime, polish residue and contaminants lifted — the floor's left dry and surgically clean.

3. Abrade

Mechanical screen/buff of the existing coating to give the new coat something to key into. No deep sanding — the existing finish stays, just roughed up enough to bond.

4. Recoat

Fresh Bona top coat laid over the top. Commercial-grade finish, dust-free job, floor looks near-new. Quicker and cheaper than a full sand and polish, and it extends the life of the floor by years.

The Machine

Bona PowerScrubber.

Commercial-grade machine from Bona. Two counter-rotating cylindrical brushes dispense Bona Deep Clean Solution, scrub the boards, and extract the dirty water in one pass — the floor's left dry and surgically clean. Works on rough, brushed, bevelled and parquet timber, plus decks and hard-surface floors.

Hours, Not Days

Most deep-clean jobs wrap in a single visit. A full sand-and-polish is a multi-day event — deep clean is measured in hours.

Stay In The House

No dust, no empty rooms, no vacating the premises. Furniture goes straight back. Minimal disruption to the household or business.

Lifts What Mops Can't

Old polish residue, grease, foot-traffic film and ingrained grime that regular cleaning leaves behind. Water-based formula, safe on virtually any coated surface.

Extends Floor Life

Sanding timber back takes thickness off the boards — each sand shortens the floor's life. A deep clean and recoat preserves the timber and adds years to the finish.

Three Levels.

1. Revive

Deep clean only. Floor walkable almost immediately. Best when the existing coating is still sound and just tired-looking.

2. Refresh

Deep clean plus a Bona Freshen Up topcoat. Ready within hours — adds a protective layer without a full recoat.

3. Recoat

Deep clean plus a durable finish — commercial-grade Bona top coat. Ready the next day. Extends the floor's life by years.

Why Stag

Owner-Operated.

No Subbies

I do every job myself — start to finish. The person who quotes it is the person who does the work.

Bona Finishes

Water-based and modified oil systems from Bona — low odour, non-toxic, durable.

Dust Extraction

Every machine runs with vacuum or dust bag. Your home stays liveable during the job.

Central Coast Local

Based in Bateau Bay, serving the Central Coast and Hunter Valley. Part of the Sand-Aid network.

Get a Quote.

Same-day response. No pressure. No obligation.

0475 509 863 Contact
Other Services
Bateau Bay Terrigal Erina Gosford The Entrance Woy Woy Avoca Killarney Vale Toukley Wyong Tuggerah Green Point Long Jetty Saratoga Umina Beach Ettalong
document.addEventListener('click', function(e) { var a = e.target.closest('a[href^="tel:"]'); if (a && typeof gtag === 'function') { gtag('event', 'phone_click', { event_category: 'contact', event_label: a.href.replace('tel:', ''), value: 1 }); } }); document.addEventListener('submit', function(e) { var f = e.target; if (f.tagName === 'FORM' && f.method && typeof gtag === 'function') { gtag('event', 'form_submit', { event_label: window.location.pathname,